Xtreme-Therm Heating and Chilling System
Xtreme-Therm Heating and Chilling System
Mokon's water based Xtreme-Therm temperature control system offers a combination of heating and chilling in one superior package. A Mokon water system combined with a chiller integrates the benefits and features of both products into one compact, self-supporting unit. The Xtreme-Therm heating and chilling systems are available with a temperature range of 20°F to 250°F (-7°C to 121°C).
- Polyester powder coated heavy-gauge steel cabinets
- NEMA 4/12 panel with “Z” purge system suitable for Class I Division 2 locations
- cULus 508A labeled panel and certified to UL 698A
- UL 98 disconnect switch
- Microprocessor controller
- Remote set point and retransmission control and communication capabilities
- Open loop (direct injection) single circuit design
- Incoloy sheathed heaters with NEMA 4 housings
- TEFC motors
- Suction and discharge pressure gauges
- Water-cooled and remote air-cooled condensers
- Water system temperatures up to 300°F (149°C)
- Hot oil heat transfer fluid system temperatures up to 650°F (343°C)
- Process cooling down to -20°F (-29°C)
- Chilling capacity up to 120 Ton
- NEMA 4/12 panel with “X” purge system suitable for Class I Division 1 locations
- NEMA 7 cast aluminum panel suitable for Class I Division 1 or 2 locations
- Closed loop (indirect cooling) and multi-zone circuits
- High-efficiency pumps up to 10 Hp
- Magnetic drive sealless pumps
- Vented and pressurized tanks
- Passivation/electro-polish surfaces
- Tool-free access panels
- Modulating cooling valve
- Stainless steel leveling legs
- Stainless steel and other custom finished cabinetry
- Audible and visual alarms
- SCR and solid-state relays
- Remote interface electrical enclosures
- Electronic controllers and sensors calibrated to ISO 17025 standards
- Variety of communication capabilities
- Remote start/stop
Please consult factory for more information.
- Chemical processing
- Corrosive/harsh environments
- Explosion-proof areas
- Flammable liquids, gases and vapors
- Heat exchangers
- Heat tracing/jacketed pipe
- Jacketed vessels
- Metal die casting
- Mixers and blenders
- OEM equipment and systems
- Oil and gas refineries
- Ovens and furnaces
- Plating, electroplating and anodizing
- Vaporizers
- Vessels and reactors
| Capacity (BTU/Hr) Δ | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Air-Cooled1 | Water-Cooled2 | Compressor Hp | Process Pump Hp | Flow Rate and Pressure | Process | Water‑Cooled Condenser | Tank Size (Gallons) | Approximate Dimensions (L x W x H) | ||||||||||||||||||||||
| 15,800 | 16,700 | 1* |
|
½″ | 10 | 38″ x 25″ x 62″ | ||||||||||||||||||||||||
| 34,100 | 35,300 | 3 | ½″ | 20 | 50″ x 28″ x 63″ | |||||||||||||||||||||||||
| 56,100 | 58,100 | 5 | 1″ | 20 | 58″ x 37″ x 69″ | |||||||||||||||||||||||||
| 89,200 | 92,000 | 7 ½ | 1½″ | 20 | 58″ x 37″ x 69″ | |||||||||||||||||||||||||
| 117,900 | 121,400 | 10 | 1½″ | 20 | 58″ x 37″ x 69″ | |||||||||||||||||||||||||
Full Range chart is based on 1 single zone up to 24 kW heater with open circuit and fluid temperature range 20°F to 200°F (-7°C to 93°C).
1. Air-cooled based on 50°F chilled water at 2.4 GPM/Ton and 90°F ambient air. Air-cooled condensers are remotely mounted in a non-hazardous area.
2. Water-cooled based on 50°F chilled water at 2.4 GPM/Ton and 85°F condensing water at 3 GPM/Ton.
* Standard Compressor on 1 Ton is reciprocating type.
Δ Capacities shown need to be de-rated for heating system motor Hp used.
